android kirjutas: Ühekordsed asjad kilekotti ja prügikasti võimalikult loogilises järjestuses, sest on ju ühekordsed ning täismask desoga üle ja teise kilekotti. Täismask jääb kilekotti vähemalt 72 tunniks ja vajadusel kasutan tagavara maski
72h ei pruugi olla piisav, sõltub keskkonnast ja temperatuurist.
Ega keegi ei tea, miks UV lampe ei kasutata? Liiga ohtlik? Igasugused LED UV lambid on tõenäoliselt mänguasjad, aga nt 24W basseinivee puhastaja kvartslamp on nii jõhker, et kui panna käsi 30-50cm kaugele viskab naha kärsa haisu ülesse. Lambid ise suht odavad:
https://www.aliexpress.com/item/4000415875639.html Ruumide puhastamiseks võiks sobida küll?
70%+ etanool, veel parem isopropüül tapab kõik. Milleks 72h.
Ennem panin siia ka lingi ühe tootja lehelt. Pasteerin ka teksti kuidas maski ja filtrit pestakse.
Re-use of half mask SR 100 and full-face mask SR 200 respirator and pre-filter and particle filter
Immersion in a 70% Isopropyl alcohol or 60% ethyl alcohol / ethanol solution has been found to effectively kill the virus. Elastomeric respirators with P3 mechanical filters offer greater efficiency and can be reused. The Sundström equipment described above has been thoroughly tested without any detrimental effects. In fact, after the equivalent of being immersed in 70% Isopropyl alcohol or 60% ethyl alcohol / ethanol solution for 5 minutes 4 times a day for 18 months, the equipment above suffered no effects in performance or efficiency, apart from the printing ink fading from the filter label.
For cleaning/disinfection of SR 100 or SR 200 mask and pre-filter and particle filter, our recommendation is as follows:
Remove the pre-filter holder with the pre-filter from the particulate filter.
Remove the particulate filter from the mask or filter adapter.
Place the mask, particulate filter, pre-filter, pre-filter holder and filter adapter (if used) in 70% Isopropyl alcohol or 60% ethyl alcohol/ethanol solution.
The parts must be completely immersed in the ethanol for at least five minutes.
Lift out the parts (wear protective gloves). Shake out the ethanol.
Let the parts air dry for at least one hour before next use.
The SR 500/SR 700 fan unit and headtops can be sprayed and cleaned with a solution of 70% Isopropyl alcohol or 60% ethyl alcohol / ethanol solution.